Wireless Drivers Update CP UVR 0401E1 CV5 CP PLUS DVR

To support Wi-Fi adapter or dongle, update the wireless drivers on your CP PLUS DVR UVR 0401E1 CV5, etc. By updating the wireless drivers on your DVR, you can connect it to a Wi-Fi network and access it remotely from your smartphone or computer.  This articale will walk you through the process of updating your CP PLUS DVR Wireless drivers in a few easy steps. A pen drive, a Wi-Fi adaptor, and most importannt patience are all required.

Why New DVR not Support a Wi-Fi adapter?

The DVR’s storage capacity is constrained. It cannot be used with Wi-Fi module adapters. Therefore, when the disk is connected, drivers may be installed in the DVR. DVR will then be able to support wireless modules,  Use the instructions below to install the wireless drivers.

Simple Steps For Wireless Driver update to DVR

1. Download the Wireless Driver Zip File form below link
2. Copy downloaded wireless file into Pendrive which formatted FAT32 bit sytem only
3. Steps to Install, wireless Driver file in DVR
   1. Connect Pendrive to DVR
   2. Go to Network > Wifi section tab
   3. Firmware Update >Choose File from pendrive > OK.
4. Restart the DVR, Now test the Wi-Fi adapter Connect to the DVR Work sucessfully

Step 1. Download the Wireless Driver for UVR 0401E1 CV5

You must first download the wifi drivers for your CP PLUS DVR model. You can access them via the CP PLUS website or the links in this helpful post. You can also download and follow along with the its PDF guide. The wifi drivers are contained in  7zip file. Once downloaded copy the 7zip file without extracting  to your pen drive . Make sure your flash drive has enough space and is formatted in FAT32.

Step 2. Copy 7zip Wireless driver file in to Pendrive

1. Cannect a Pendrive into pc System .
2. Format Pendrive in FAT32 bit system Important.
3. Copy the downloaded DVR 7zip wireless file into Pendrive and disconnected safly It.

Step 3. Install the wireless driver in unsupported DVR

Before Installing the driver make sure the HDD( Hard Disk) drive is connected to your DVR otherwise not installed.

• Power UP the DVR, log in and go to DVR Main Manu
• Go to the Network Menu and go to WiFi Option tab.

• Connect Pendrive to DVR usb Port
• Now you can see the Update Manu appear in a Popup window but you Skip this menu.
• Attend Network > Wifi Option tab Windows
• Here you see the Firmware Update tab Button but inactive
• Simple Change to another left side tab ( Like 3G/4G, TCP/IP ) and back again Wifi Tab
• Now go to mouse arrow Firmware Update Button you can see the button active with a red color.
• Just Click on it and explore Pendrive Select the Wireless7 zip file and click on OK.
• Now you see the confirmation popup of the wireless driver install warning, just click OK.

• Wait a momemts now you see Wireless Module Firmware Version 1 installed on Unsupported DVR With a successful Popup Window.

Step 4. Insert a Wi-Fi adapter and test the work Network is Connect

After that restart the driver install DVR

• Connect dvr supported Wifi Adapter
• Goto Main manu >Network > Wifi Option tab
• Choose the Wi-Fi network or Hotspot available on the Supported module.
• Click Show Wifi Network Enter the Password and Connect.

Congratulations, You have successfully updated your CP PLUS DVR UVR 0401E1 CV5‘s Wi-Fi drivers and connected it to a Wi-Fi network. With wireless connectivity, you can now access your DVR from anywhere using your smartphone or computer.

Note : Buy Supported Wifi Adapter for your DVR and make sure supports the 2.4 GHz radio band.

Tenda U3 WiFi Dongle 300Mbps

D-Link DWA-131

R CCTV A.D NET USB WiFi Adapter

TP-Link USB WiFi Adapter

Conclusion

Installing a Wireless Driver for your DVR is  simple task. Just download and connect the installer. It is important that you make sure that the HDD is installed on the DVR. Otherwise the Firmware Update option is disabled and the Driver is not installed properly.

FAQs